CONTACT US

Address:Middle Dexin Road, Tianqu Industrial Park, Decheng District, Dezhou, Shandong P.R. China

Post Code:253000

Tel:+86-534-2369766

Fax:+86-534-2392966

Email:sales@xudaenviro-tech.com

PARTNERS & AGENTS

PRODUCTS

Auto 1250 chamber filter press
INTRODUCTION

Plate type filter press is intermittent solid-liquid separation equipment characterized by wide range of application, good separating effect, simple structure, convenient and safety operation.

Hydraulic cylinder provide pressure to filter plates and forms dozens or even hundreds of closed chambers. Suspension is feed into these chambers by slurry pump, solid is stopped by filter cloth, but filtrate will pass through due to the pump pressure and discharge outside of the machine.

APPLICATION

Plate type filter press can reach better filtration performance than belt type filter press. It is widely used in sewage treatment including textile, printing and dyeing, pharmaceutical, papermaking, leather and monosodium glutamate industries.

TECHNICAL PARAMETER

 

MODEL: XZ/1250-U

FILTRATION AREA

(M2)

PLATE NO

(PCS)

CAKE THICKNESS (MM)

CHAMBER VOLUME (M3)

UNIT WEIGHT (KG)

ANCHOR CENTER (MM)

DIMENSION

LxWxH

(MM)

CHAMBER PLATE THICKNESS: 60MM

80

1+29+1

30

1.20

7106

3270

4755×1970×1660

100

1+37+1

1.56

7772

3765

5250×1970×1660

120

1+45+1

1.83

8404

4260

5750×1970×1660

150

1+55+1

2.31

8284

4880

6370×1970×1660

160

1+59+1

2.38

9494

5130

6615×1970×1660

*200

1+75+1

3.04

10737

6120

7610×2130×1660

*240

1+89+1

3.57

11824

6990

8480×2130×1660

*250

1+93+1

3.73

12087

7235

8720×2130×1660

CHAMBER PLATE THICKNESS: 65MM

80

1+29+1

35

1.35

7264

3415

4900×1970×1660

100

1+37+1

1.71

7968

3950

5440×1970×1660

120

1+45+1

2.07

8649

4485

5980×1970×1660

150

1+55+1

2.52

9482

5155

6640×1970×1660

160

1+59+1

2.70

9814

5425

6910×1970×1660

*200

1+75+1

3.42

11144

6495

7980×2130×1660

*240

1+89+1

4.05

12307

7435

8920×2130×1660

*250

1+93+1

4.23

12610

7700

9190×2130×1660

CHAMBER PLATE THICKNESS: 75MM

80

1+29+1

40

1.55

7607

3705

5195×1970×1660

100

1+37+1

1.97

8368

4320

5810×1970×1660

120

1+45+1

2.39

9116

4935

6425×1970×1660

150

1+55+1

2.91

9922

5705

7195×1970×1660

160

1+59+1

3.11

10387

6015

7505×2130×1660

*200

1+75+1

3.95

11839

7245

8735×2130×1660

*240

1+89+1

4.67

13109

8325

9815×2130×1660

*250

1+93+1

4.88

13442

8630

10120×2130×1660